Showing all 12 results
Xpert's built-in steel hobs bring durable, gas-powered cooking to kitchens across Pakistan — from Karachi and Lahore to Islamabad, Rawalpindi, and Faisalabad. Every model on this page pairs a stainless steel (or matte black finished) panel with brass burners and cast-iron pan supports, built to take the daily wear of a busy Pakistani kitchen. Below you'll find 12 in-stock models between Rs. 70,000 and Rs. 120,000, a full price breakdown, sizing guidance, and answers to the questions we hear most from buyers nationwide.
A stainless steel hob — also called a steel hob or SS hob — is a built-in cooktop with gas burners mounted on a panel of stainless steel instead of tempered glass or ceramic. It's the traditional, heavy-duty option in Pakistani kitchens: the same steel finish used on commercial cooking equipment, brought down to a size that fits a standard countertop cutout.
In a typical Xpert steel hob, brass or alloy burners sit on cast-iron pan supports bolted directly into the steel panel. Where glass hobs lean on being a single seamless wipeable sheet, steel hobs lean on resilience — the surface shrugs off scratches, heavy pots, and dropped utensils without the impact risk that comes with a glass surface. Most models pair this with auto-ignition and a flame failure device that cuts the gas supply if a flame goes out unexpectedly, and several are available in a matte black finish for buyers who want steel's durability with a darker, less industrial look.
For Pakistani kitchens, the case for steel is practical: it's the surface most commercial and high-traffic home kitchens already trust, it's straightforward and inexpensive to service, and — because it runs on standard gas — it works the same on Sui gas or an LPG cylinder, unlike induction hobs, which depend on a stable electricity supply.
Xpert's built-in steel hob range runs from Rs. 70,000 to Rs. 120,000, covering 12 models across 3-burner countertop-width units up to larger 5-burner hobs. Where a model lands in that range mostly comes down to burner count, burner material (brass vs. alloy), and finish (standard stainless steel vs. matte black). Prices below are current Xpert retail prices in Pakistan, inclusive of standard warranty.
| Tier | Price Range (PKR) | Typical Configuration | Example Model |
|---|---|---|---|
| Entry | Rs. 70,000 – 85,000 | 3 burners, brass burners, standard stainless steel finish, auto-ignition | XST-1017 |
| Mid-Range | Rs. 85,000 – 105,000 | 4 burners, brass burners, cast-iron supports, matte black or SS finish | XST-4-BIG-007 |
| Premium | Rs. 105,000 – 120,000 | 5 burners, heavy-duty cast iron, brass burners, extended warranty | XST-5-BHT |
Steel, glass, and ceramic hobs all do the same core job — they just trade off differently on durability, look, and upkeep. Here's how Xpert's three built-in ranges compare:
| Steel Hob | Glass Hob | Ceramic Hob | |
|---|---|---|---|
| Surface | Stainless steel or matte black, gas burners | Tempered glass, gas burners | Glass-ceramic, radiant/induction heat |
| Look | Industrial, professional | Sleek, seamless, modern | Minimal, flush touch-control |
| Durability | Highest — resists scratches, heavy pots, dropped utensils | Good — tempered glass resists thermal shock, but impact risk remains | Good — flat surface, but scratch-sensitive with abrasive cleaning |
| Cleaning | Moderate — visible marks over time, needs the right cleaning agent to avoid dulling the finish | Easy — single wipeable sheet | Easiest — fully flat, no burner grates |
| Heat source | Gas (Sui gas / LPG) | Gas (Sui gas / LPG) | Electric — needs stable power supply |
| Best for | High-use kitchens prioritizing heavy-duty durability and easy repair | Buyers who want a modern look without giving up gas cooking | Areas with reliable electricity, buyers wanting a minimal touch-control surface |
Deciding between the three often comes down to how the kitchen actually gets used: steel is the practical choice for high-traffic or commercial-adjacent kitchens where scratch resistance and easy repair matter more than looks, while a glass hob edges ahead on design if the kitchen is lower-traffic and appearance is the priority. Both steel and glass run on gas, so — as with glass — either is the safer choice over a ceramic or induction hob if load-shedding or an unreliable power supply is a concern in your area.
Compare full specs on Xpert's:
Steel hobs are sold by width and burner count, and the cutout in your countertop needs to match before you order. Cutout sizing is standardised across materials, so the same size logic applies whether you're comparing a 3-burner or a 5-burner model:
| Size | Burners | Typical Cutout (W x D) | Best For |
|---|---|---|---|
| 45–60cm | 3 burners | ~56 x 49 cm | Small kitchens, apartments, single-family use — see the XST-3-EC |
| 60–75cm | 3–4 burners | ~56 x 49 cm to 68 x 49 cm | Standard family kitchens |
| 85–90cm | 5 burners | ~83 x 49 cm | Larger households, joint families, frequent entertaining — see the XST-5-BHT |
Always confirm the exact cutout dimensions on the product page for your chosen model before your kitchen countertop is cut — cast-iron pan supports and burner spacing can shift the required clearance by a centimeter or two between models even within the same burner count.
What does "hob" mean?
A hob is the cooking surface built into a kitchen countertop — the burners or heating zones you cook on. It's the standard British-English term; in American English the equivalent is usually called a "cooktop" or "stovetop." In Pakistan, "hob" and "kitchen hob" are both used interchangeably with these terms.
What is a gas hob?
A gas hob is a built-in cooktop with burners that run on gas — either piped Sui gas or an LPG cylinder — rather than electricity. It sits flush into a kitchen countertop, as opposed to a freestanding gas stove or cooking range, which is a standalone unit with its own base and typically an oven underneath.
Is a steel hob durable?
Yes — stainless steel is one of the most durable hob surfaces available. It resists scratches, heavy pots, and dropped utensils better than glass, and it's straightforward to service if a burner or ignition component needs repair. Models with a flame failure device add an extra layer of safety by shutting off gas flow if a flame goes out unexpectedly.
How long does a steel hob last?
With normal use and basic care — regular cleaning with the right products and avoiding harsh abrasives on the finish — a good-quality steel hob typically lasts 8–10+ years, and the panel itself often outlasts the burner and ignition components, which are generally the first parts to need servicing.
Steel hob vs glass hob — what's the real difference?
Both use real gas flames rather than electric heat. The difference is the panel: steel is more scratch- and impact-resistant and suits high-traffic kitchens, while glass gives a sleeker, seamless look that's slightly easier to wipe clean day to day.
What size hob do I need for my kitchen?
Most Pakistani kitchens use either a 60cm 3-burner hob or a 90cm 5-burner hob, depending on countertop space and household size. Check the "How to Choose the Right Steel Hob Size" section above for a full cutout-size breakdown.
Does Xpert deliver and install steel hobs outside Karachi?
Yes — Xpert delivers built-in steel hobs across Pakistan, including Lahore, Islamabad, Rawalpindi, and Faisalabad, with installation guidance provided for every order.
Since 1999 Xpert is one of Pakistan’s leading brands for built-in kitchen appliances, known for its innovation, quality, and a team that’s always pushing boundaries through research and expertise.
This will close in 0 seconds
